Russia’s largest producer of zinc and zinc-based alloys
up-to-date world technology for zinc production
metal purity by zinc content not less than 99,995%
Tin-indium solder contains 48% of tin and 52% of indium. Suitable for soldering parts that have special temperature sensitivity requirements.
Main applications:
- Soldering, tinning of copper alloys
- Soldering, tinning of brass
- Soldering, tinning of bronze
- Soldering, tinning of aluminum alloys
- Soldering, tinning of precious metals
PRODUCED IN THE FOLLOWING FORMS
INGOT
12*12*50 mm
WIRE
Diameter 2 mm
ROD
Diameter - 8 mm, length - 200 mm
Indium is a semiconductor with high electrical conductivity. The low concentration of indium in alloys with other metals increases this characteristic.
Main applications:
- Technique
- Electronics, solarcells, microelectronics
- Optoelectronics
- Jewelry production
- Stomatology
- Semiconductors
- Metalworking, solders
PRODUCED IN THE FOLLOWING FORMS
INGOT
IN00 up to 1 kg
Zinc alloys with aluminum, magnesium and copper are widely used in foundry production.
The alloy has a low melting temperature within the range of 381-387°C. The surface quality of the cast part made of ZAMAK alloy does not require subsequent polishing.
ZAMAK alloy can be used to produce products of any shape and complexity,including thin-walled, which will be so precise that no additional surface treatment is required.
Main applications:
- die casting
- hot chamber
- nonpressure die casting
- bearing coating
- production of carburetors bodies
- sanitary engineering
- door furniture coating
PRODUCED IN THE FOLLOWING FORMS
JUMBO 1 ton
INGOT 25 KG
JUMBO 2 tons
Indium is a semiconductor with high electrical conductivity. The low concentration of indium in alloys with other metals increases this characteristic.
Main applications:
- Technique
- Electronics, solarcells
- Optoelectronics
- Jewelry production
- Stomatology
- Microelectronics
- Semiconductors
- Metalworking, solders
PRODUCED IN THE FOLLOWING FORMS
INGOT
IN0000 up to 1 kg
It is used as thermal interface for processors, cryogenic vacuum seals, as heat-conducting and conductive gaskets for magnetron sputtering, also in other types of electronics.
| Indicator | Sizes of foil, mm |
| Thickness/Maximum deviation from thickness: | 0,05/±0,01; 0,1/±0,02; 0,5/±0,03; 1,0/±0,04 |
| Range of possible length: | 100-300 |
| Range of possible width: | 10-120 |
| Deviation from length and width: | ±0,4 |
Main applications:
- Instrumentation and equipment
- Electronics
- Nuclear industry
PRODUCED IN THE FOLLOWING FORMS
Sheets
Width: 10-120 mm
Thickness: 0.05; 0.1; 0.5; 1.0 mm
Thickness: 0.05; 0.1; 0.5; 1.0 mm
It is used in electronics as anti-corrosion material for metal products and as finishing material.
| Indicator | Sizes of foil, mm |
| Thickness/Maximum deviation from thickness: | 0,05/±0,01; 0,2/±0,03 |
| Range of possible width: | 10-300 |
| Range of possible length: | By agreement |
| Deviation from length and width: | ±0,4 |
Main applications:
- Electrotechnics
- Automobile industry
PRODUCED IN THE FOLLOWING FORMS
Roll
Length: by agreement
Width: 10-300 mm
Thickness: 0.05; 0.2 mm
Width: 10-300 mm
Thickness: 0.05; 0.2 mm
